Spin Brushless Out-Run Motor 8500kv (16D x 11H mm) -B130X Xtreme - SMT1610-8500

Spin Brushless Out-Run Motor 8500kv (16D x 11H mm) -B130X
    Model: SMT1610-8500
    Manufactured by: Xtreme Production
 
 

-This outrunner motor is mainly designed for Blade 130X or similar size heli, running with 7.4V Lipo batteries.
-We recommend to use 10 or 11T pinion gear.
- It is more powerfull than the previously released 8000kv version (SMT1610-8000), but also battery consumption is more too.
- Expected flight time (3D flight) will be around 4 minutes, using 450 mah batteries.

Motor Kv:    8500RPM / Volt (KV)
No-Load Current (Io):    1.1 Amps @ 7.4V
Max Continuous Current:    8.5 Amps
Weight:    7.2 grams
Diameter:    16 mm
Length:    17.5 mm
Shaft Diameter:    1.5 mm
Shaft Length::    8 mm
Distance Between Holes    8.5mm , M1.4 screw
Max Lipo Cell:    2 Cell (7.4V)

** For maximum life, please ensure that the bearings are maintained properly; put a small drop of bearing oil on each bearing every 5 flights. And please make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding and causing over load to the motor.